In 1888 a gentlemen named Emile Berliner invented the flat disc record. These very first discs were produced of a vulcanised rubber and were between 12.5cm and 18cm in diameter.
Later he discovered that a mixture of shellac (a secretion from the lac beetle) and slate dust produced an extremely hard wearing but very brittle surface and from this the 78rpm disc was developed. The slate dust was used because the older acoustic gramophones used steel needles with a pick-up weight of up to 200 grams and the slate helped grind the needle to fit the groove more closely. A modern record pick-up tracks at a recommended maximum of 7 grams. Most record players today can pick up a track at under 1 gram.
Between 1900 and 1960 the discs were usually 25 or 30cm across & gave between 2 and 5 minutes playing time each side. In the beginning sound was recorded with a horn attached to a diaphragm and stylus, which scratched out a trace in a rotating wax disc. This method lasted until 1925, when microphones became sufficiently developed to allow the recording of music. uring the Second World War records were sent from the USA to overseas POW camps to keep up prisoner morale. Due to their brittleness these were frequently broken in transit, so a new compound, vinyl, was born to give greater flexibility and reduce the likelihood of breakages.
During the war years vinyl was a very expensive material but the special circumstances of war justified it’s use.
By 1948, Columbia Records had developed its 30cm Long Playing record, rotating at 33rpm and giving about 20-30 minutes a side which saw the downfall of shellac and vinyl was used from then on. Long-playing phonograph records may look the same now as when they were introduced in 1948, but countless refinements and developments within the industry have been made to perfect the long-playing record’s technical excellence and insure the best in sound reproduction and quality available in recorded form.
A year later the first 45rpm disc was produced by RCA, 18cm in diameter and giving about 3 minutes a side. No better than the 78 for playing time, but ideal for pop record companies and juke box manufacturers! The 45 was light, compact, sounded much better than the 78 and was less prone to getting broken. 1958 saw the arrival of stereo records although unsuccesful experiments with two channel sound had been going on since before the First World War. This pleased those first “collectors” but irritated the retailers who had to keep dual stocks of LPs in mono and stereo and of course, the record companies had to prepare separate mono and stereo mixed versions of the LPs to start with. Stereo was generally only used for LPs up until about 1970, when pop singles began to appear in stereo versions so by this time the mono LP became a thing of the past.
In the late 1950s some companies experimented with a 16rpm speed originally intended for ‘talking books’ but was also used for music LPs in Eastern Europe and Africa. An American company also produced an 8rpm discs in the early 1970s for talking books for the blind. The 30cm disc rotating at 45rpm made it’s first appearance in 1975 and makes the most of the best features of the 33 and 45rpm formats by offering a reasonable playing time (up to 12 mins/side) at a greatly enhanced volume and frequency response. EMI produceed a short run of classical LPs on this format in the early 1980s.
Despite the devastation caused to vinyl sales by the rapid rise in popularity of the CD, the format still thrives among keen record collectors and club disc jockeys.
Originally posted at http://brenda-inventions.blogspot.com/2008/08/who-invented-vinyl-record.html